The role of the towline cable and installation precautions
Times：May 4,2019 Hits：874
Cables can be seen everywhere in our lives. For example, if we don't have wires and cables, there is no signal on the mobile phone. If there is no signal, we can't use it. So our life is inseparable from wire and cable.
Cables can be seen everywhere in our lives. For example, if we don't have wires and cables, there is no signal on the mobile phone. If there is no signal, we can't use it. So our life is inseparable from wire and cable. There are many kinds. Today we mainly explain the drag chain cable. If it is an expert, I believe that I don’t know what I want to say, but if I am just in touch with this line, I will encounter a problem. What is the drag chain cable? What about it? What does it do? What should I pay attention to when installing? Here is a small series for you to introduce.
The towline cable is usually installed in the equipment unit. Because many equipments need to move back and forth to prevent the cable from being worn and pulled off due to movement, the cable is placed in the towline cable to form a good protection for the cable. And it is more convenient in the process of moving back and forth, and also realizes the movement of the cable. In life, towline cables are commonly used in industrial electronic systems, robotics, fire protection systems, cranes and metallurgical industries.
When it comes to the installation of the towline cable, people began to notice the installation and protection of the cable in the 1980s. If the cable can not be protected, the economic loss is huge, and in severe cases, it will lead to The production line was discontinued, so the towline cable appeared.
So what should you pay attention to when installing the drag chain cable? First, the towline cable must not be twisted. Rotate the reel first to unfold the cable and, if necessary, unfold or hang it. Second, you need to pay attention to the minimum bending radius of the cable. The radius data can be found in the flexible towline cable. Then, the cables need to be loosely placed in the drag chain, and the cables placed in the drag chain are not in contact with each other. Finally, the highlights of the cable must be fixed, at least when the chain needs to be moved. If the chain is accidentally broken, the cable needs to be replaced.
